EPCOM Certified Products
We test, inspect and restore all EPCOM products to working conditions.
Stock | Classification | Your Price |
---|
Optional Accessories
Product Specifications
GENERAL SPECIFICATIONS
Frequency Range ............ K : 146 to 174MHz K2 : 136 to 150MHz
Number of Channels....................16 channel
Channel Spacing ........................Wide : 30kHz, 25kHz
Narrow : 15kHz, 12.5kHz
(PLL channel stepping 2.5kHz/5kHz/6.25kHz/7.5kHz)
Operating Voltage ........................... 13.6V DC±15%
Current Drain
Standby ....................... 0.8A
Standby w/power save ... 0.3A
Operationg mode DC-IN: Backup FAN: Temp, SAVE: ON, DISP: OFF
Receive ........................ 1.2A
Transmit/Receive ........... Less than 13A
Duty Cycle
Receive .............................. 100%
Transmit ............................. 100% (100% @25W)
Frequency Stability............... Less than ±0.0002% –30°C to +60°C
(–22°F to +140°F)
Antenna Impedance .................. 50Ω
Operating Temperature Range.... –30°C to +60°C (–22°F to +140°F)
Dimensions .. 483 (19) W x 88 (3-1/2) H x 340 (13-1/3) D mm (inch)
Weight ...................................... 9.7kg (21.4 lbs.)
- RECEIVER (Measured by TIA/EIA-603)
Sensitivity at 12dB SINAD: 0.35µV 20Db and Quieting : 0.45µV
Selectivity ............................... Wide : 85dB (±30kHz)
Narrow : 80dB (15kHz), 77dB (12.5kHz)
Intermodulation.......................... Wide : 80dB (±30kHz/±60kHz)
Narrow : 75dB (±15kHz/±30kHz)
Hum and Noise ........................ Wide : 50dB Narrow : 45dB
Spurious & Image Rejection ...... 90dB
Audio Output (Ext. Speaker) ....... 4W at 4Ω less than 5% distortion
Audio Distortion (Ext. Speaker).... Less than 2.5% at 1000Hz
Band Spread .............................. 3MHz
- TRANSMITTER (Measured by TIA/EIA-603)
RF Power Output ................ 50W adjustable to 25W (100% duty @25W)
Type of Emission ................ Wide : 16K0F3E Narrow : 11K0F3E
Spurious Response ............. 80dB
FM Hum and Noise ............. Wide : 50dB Narrow : 45dB
Audio Distortion .................. Less than 3% at 1000Hz
Microphone Impedance........ 600Ω
Band Spread ...................... K : 28MHz K2 : 14MHz
The worlds most used repeater!
Preferred by the professionals.
- Work cycle at 100 %, 25 W.
- Integrated community panel of 16 tones.
- CW ID.
- DB-25 connector with logical interface for auxiliar input and output for excellent control.
- Input voltage: 13.8 Vcc.
- Entry for backup batteries with is activated automatically (To keep the battery charged enable bridge charge).
- High stability oscillators (TCXO).
- 19” rack mount design.
- Compatible for conventional and trunk systems
New characteristics of version 2:
- Backup battery alert and operation tone.
- Remote control function and auxiliary output via DTMF.
- On/Off control.
- Courtesy tone (only in repeater operation mode).
- BNC female connector for RX and N-female for TX.
- Switching capability integrated for base station mode.
Base station mode:
- 16 channels.
- Simplex or full duplex operation mode.
- Single priority scan.
- 2 Digit numeric LED display, displays channel number and operation status information.
- Voice encryption port.
- Remote control inputs.
To ensure optimal work of this Repeater it is required to make adjustments with service a monitor, please ask our Engineering Department.