EPCOM Certified Products
We test, inspect and restore all EPCOM products to working conditions.
Stock | Classification | Your Price |
---|
Optional Accessories
Product Specifications
Physical Port
• 24-port 100/1000BASE-X mini-GBIC/SFP slots
• 16 10/100/1000BASE-T RJ45 copper ports, shared with port-1 to port-16
• 4 10GBASE-SR/LR SFP+ slots, compatible with 1000BASE-SX/LX/BX SFP
• 2 20Gbps Hardware Stacking ports
• RJ45 to DB9 console interface for switch basic management and setup
• 1 RJ45 Ethernet management port for switch basic management and setup
• 1 USB 2.0 for backup/upload configuration and firmware upgrade
IP Stacking
• Connects with stack member via both Gigabit TP/SFP interface and 10G SFP+ slots
• Single IP address management, supporting up to 24 units stacked together
Hardware Stacking
• Connects with stack member via QSFP+ slots
• Supporting up to 6 units stacked together
IP Routing Features
• IP routing protocol supports RIPv1/v2, RIPng, OSPFv2/v3, BGP4/4+
• Routing interface provides per VLAN routing mode
• VRRPv1/v3 protocol for redundant routing deployment
• Supports route redistribution
Multicast Routing Features
• Supports PIM-DM (Protocol Independent Multicast – Dense Mode) and PIM-SM (Protocol • Independent Multicast – Sparse Mode) and PIM-SSM (Protocol Independent Multicast – Source • Specific Multicast)
• Supports DVMRP (Distance Vector Multicast Routing Protocol)
• Supports IGMP v1/v2/v3 and MLD v1/v2
Layer 2 Features
• Complies with the IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z Gigabit Ethernet and IEEE 802.3ae 10Gb/s Ethernet standard
• Supports auto-negotiation and half-duplex/full-duplex modes for all 10BASE-T, 100BASE-TX and 1000BASE-T ports
• Auto-MDI/MDI-X detection on each RJ45 port
• Prevents packet loss flow control
- IEEE 802.3x pause frame flow control in full-duplex mode
- Back-pressure flow control in half-duplex mode
• High performance Store-and-Forward architecture, broadcast storm control, port loopback detect
• 32K MAC address table, automatic source address learning and aging
• Supports VLAN
- IEEE 802.1Q tag-based VLAN
- GVRP for dynamic VLAN management
- Up to 256 VLANs groups, out of 4041 VLAN IDs
- Provider Bridging (VLAN Q-in-Q, IEEE 802.1ad) supported
- Private VLAN Edge (PVE) supported
- GVRP protocol for Management VLAN
- Protocol-based VLAN
- MAC-based VLAN
- IP subnet VLAN
• Supports Link Aggregation
- Maximum 128 trunk groups with up to 8 ports per trunk group
- IEEE 802.3ad LACP (Link Aggregation Control Protocol)
- Cisco ether-channel (static trunk)
• Supports Spanning Tree Protocol
- IEEE 802.1D Classic Spanning Tree Protocol (STP)
- IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
- IEEE 802.1s Multiple Spanning Tree Protocol (MSTP), spanning tree by VLAN
- BPDU & root guard
• Port mirroring to monitor the incoming or outgoing traffic on a particular port (many to many)
• Provides port mirror (many-to-1)
Quality of Service
• 8 priority queues on all switch ports
• Supports strict priority and WRR (Weighted Round Robin) CoS policies
• Traffic classification
- IEEE 802.1p CoS/ToS
- IPv4/IPv6 DSCP
- Port-based WRR
• Strict priority and WRR CoS policies
Multicast
• Supports IPv4 IGMP snooping v1, v2, and v3, and IPv6 MLD v1 and v2 snooping
• Querier mode supports
• Supports Multicast VLAN Register (MVR)
Security
• IEEE 802.1x port-based network access authentication
• MAC-based network access authentication
• Built-in RADIUS client to cooperate with the RADIUS servers for IPv4 and IPv6
• TACACS+ login users access authentication
• IP-based Access Control List (ACL)
• MAC-based Access Control List
• Supports DHCP snooping
• Supports ARP inspection
• IP Source Guard prevents IP spoofing attacks
• Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding
• Supports URPF to avoid IP address clone
• IPv6 ND snooping
Management
• Management IP for IPv4 and IPv6
• Switch Management Interface
- Console/Telnet Command Line Interface
- Web switch management
- SNMP v1, v2c, and v3 switch management
- SSH/SSL secure access
• BOOTP and DHCP for IP address assignment
• DHCP relay and option 82
• Firmware upload/download via TFTP or HTTP Protocol for IPv4 and IPv6
• SNTP (Simple Network Time Protocol) for IPv4 and IPv6
• User privilege levels control
• Syslog server for IPv4 and IPv6
• Four RMON groups 1, 2, 3, 9 (history, statistics, alarms, and events)
• Supports ping, trace route function for IPv4 and IPv6
• User Privilege levels control
• Link Layer Discovery Protocol (LLDP) and LLDP-MED
Redundant Power System
• 100~240V AC, -40V~-60V DC (optional) dual redundant power
Physical and Electrical Characteristics:
• Redundant power supply: 100-240VCA / 79W and 48VDC
• Dimensions: 1U Rack, 415 x 325 x 44.5 mm.
• Weight: 4.3 Kg.
• Operating temperature: 32 to 122 ºF (0 to 50°C)
*2 Year warranty.